What’s the history behind 192.168.1.1?
Originally there were 5 classes of internet address A, B, and C, which were general use D which was reversed for multicast addressing and E as reserved for experimental use. This class system was used when allocating out IP addresses to a company.
Class A, B, and C Addresses
Although write out IPv4 addresses in decimal the definitions of A, B, and C addresses actually considers how the address appears in binary. In this, the address is represented by 4 groups of 8 bits. Also, note that IP Addresses are actually split into 2 parts. A part presenting the network and a part representing the host.
On a typical IP Address as used on a home network.
192.168.1.1
In Binary that is.
11000000 10101000 00000001 | 00000001
Network part | Host Part
192.168.1.is the network part of the address and the last 1 is the host part.
What is 192.168.1.1 IP Address?
192.168.1.1 IP address is the default gateway of most wireless routers like TP-Link, Cisco, Linksys, D-Link, Belkin, Asus, Netgear, and Billion Router or ADSL modems. There are several IP main addresses a router can take, 192.168.1.1 is the most common one though 10.0.0.1 or 192.168.0.1are also other options. These are commonly known as host addresses.
Concretely one can manage Security Options, Network Management, WAN (Wide Area Network), ADSL (Asymmetric Digital Subscriber Line), IP QoS, DNS (Domain Name System), WLAN (Wireless Local Area Network) settings, DSL (Digital Subscriber Line), proxy, LAN (local area network), MAC (Medium Access Control), WPS block amongst others.
How to login 192.168.1.1 IP Address Step By Step Guide
STEP 1. First of all, you can enter Https://192.168.1.1 into your browser’s address bar.
STEP 2. Then If you getting an error, then Https://192.168.1.1 is not your router’s IP address.
So my friends you can check below Default Router IP Address List:
Router Brand |
Login IP |
---|---|
2Wire |
|
3Com |
|
Actiontec |
|
Airlink |
|
Airlive |
|
Airties |
|
Apple |
|
Amped Wireless |
|
Asus |
|
Aztech |
|
Belkin |
|
Billion |
|
Buffalo |
|
Dell |
|
Cisco |
|
D-Link |
|
Edimax |
|
Eminent |
|
Gigabyte |
|
Hawking |
|
Huawei |
|
LevelOne |
|
Linksys |
|
Microsoft |
|
Motorola |
|
MSI |
|
Netgear |
|
NetComm |
|
Netopia |
|
Planet |
|
Repotec |
|
Senao |
|
Siemens |
|
Sitecom |
|
SMC Networks |
|
Sonicwall |
|
SpeedTouch |
|
Sweex |
|
Tenda |
|
Thomson |
|
TP-Link |
|
Trendnet |
|
U.S. Robotics |
|
Zoom |
|
ZTE |
|
Zyxel |
|
STEP 3. Then after Enter your default roter username and password to login to your router.
STEP 4. If you forgot your username and password you can follow the below provided instructions to recover them.
If you did not change the default username and password that comes with the router then you can please check your Default Router Username and Password List:
Router Brand |
Login IP |
Username |
Password |
---|---|---|---|
3Com | http://192.168.1.1 | admin | admin |
Belkin | http://192.168.2.1 | admin | admin |
BenQ | http://192.168.1.1 | admin | admin |
D-Link | http://192.168.0.1 | admin | admin |
Digicom | http://192.168.1.254 | admin | michelangelo |
Digicom | http://192.168.1.254 | user | password |
Linksys | http://192.168.1.1 | admin | admin |
Netgear | http://192.168.0.1 | admin | password |
Sitecom | http://192.168.0.1 | sitecom | admin |
Thomson | http://192.168.1.254 | user | user |
US Robotics | http://192.168.1.1 | admin | admin |
STEP 5. Once you are in the router’s admin panel then you will be able to change and modify all internet settings.
What to do if you forgot your router’s username and password
Hey Guys!! If you already changed and forget your router username or password, then you can simply reset the router alternatively. By resetting it to its factory reset settings, the default Username and password will be restored. The reset button on most routers is very small and can be tough to find. You’ll need a pencil nib, pin, or other thin items to press it down for around 15 seconds.
HOW TO ACCESS CISCO ROUTER USING 192.168.1.1
➥ First of all you can connect your Cisco Router to your computer using RJ45 cable.
➥ Then after Turn on Cisco Router and Computer.
➥ Next Open Browser and type https://192.168.1.1 and press Enter.
➥ Now enter Default username and password (admin-admin) if you don’t change. Or Enter your username and password.
➥ It will open the Cisco Router Admin Page.
➥ Now you can customize all your settings and also change WiFi password.
TP-LINK ROUTER LOGIN
➥ TP-LINK Router has an IP address 192.168.1.1.
➥ You can connect your TP-Link Router and Computer with the RJ45 cable.
➥ Next Type https://192.168.1.1 in browser and Press Enter.
➥ Enter username and password.
- IP address: 192.168.1.1 (or http://tplinkwifi.net)
- Username: admin
- Password: admin/password
➥ Now go to Wireless Setting and change settings that you need.
D-LINK ROUTER LOGIN
➥ First of all connect D-Link router with your computer with Ethernet cable.
➥ Then Turn on your computer.
➥ Now Open Web browser. Type http://192.168.1.1 or http://dlinkrouter and press Enter.
➥ Log in to the D-Link router with the administrator username and password.
➥ If you log in the first time then you can click on Setup and then go to wireless settings.
➥ Then you can setup it manually or automatically.
HOW TO LOG IN TO A NETGEAR ROUTER
➥ First of all, you can connect the Netgear router with your Windows computer
➥ Then open Browser and type Https://192.168.1.1 and Press Enter.
➥ Now Enter Netgear Router’s default username and password.
➥ Guys If you don’t know default username-password then check our above table.
➥ Go to Wireless Settings and customize settings.
Final words
I think it should be enough information about the 192.168.1.1 IP Address Default Router Username & Password. I hope that all kinds of information useful to you but if you facing any problem regarding this post, then please comment for us we will try to solve your problem as soon as possible. Thanks for visiting our site.